Article selected from our quarterly magazine dedicated to the largest
and most luxurious boats with information, interviews, technical
articles, images and yachting news
CANADOS 100 S
The first of three new Canados 100s already commissioned, is under completion and will be presented at the Cannes Boat Show. The boat, built for its owner from Fort Lauderdale, in Florida, is in typical European style, both with regards to the external lines, created by designer Marco Seri, and to the exploitation of the internal spaces, thanks to the layout realised by Marine Tecnology Services, an engineering company in the Canados Group. Below deck, the boat is characterised by a lower deck divided into 2 VIP staterooms and 2 guest staterooms, both with twin beds but with the option of a third wall bed. The crew's rooms are at the bow, accessible from the galley situated on the upper deck, arranged into three cabins plus dinette, while the living room and the dining area are situated on the main deck, and the internal wheelhouse is located on the staggered floor, higher up. The boat owner's stateroom is spacious, furnished with great care and provided with a very large private bathroom, with a hydro-massage bath and separate shower unit. The bottom is characterised above all for the adoption of screw propeller tunnel, a solution specifically requested by the owner in order to reduce the draught of the hull which, like the upper works, is made of aluminium and magnesium alloy. Overall length of 32.60 m., 7.60 m. wide, with a 2x2,000 HP MTU motorization, the boat reaches 29 knots maximum speed, and 25 knots cruising speed.
Canados Group - via dell'Idroscalo 182, 00121 Rome - Tel +39 06 563397327, Fax +39 06 56339969 - e-mail: firstname.lastname@example.org.