Nautica Digitale
Share this page
Tell a friend

Autumn 2006

Article selected from our quarterly magazine dedicated to the largest and most luxurious boats with information, interviews, technical articles, images and yachting news



Yachting catalogue

Navigation tests

Used boats


Video Nautica


Bentti's Sail Division, an independent company since 1981, presents its new displacing motor yacht with a "canoe stern." This new model with a rounded stern is typical in Northern Europe. True to tradition, top quality supplies were used for the interiors and fixtures whereas long lasting materials were chosen for its other main components. The superstructure was built in Peralluman 450 and FE 420 steel was used for the hull. The new motor yacht signed by Benetti Sail Division stands out for its classic exterior design, which in itself is the shipyard's trade mark, as well as for its choice of materials for the interiors. This model has two decks and a flying bridge with a clear cut division between the areas in common and cabins. These, in fact, are to be found below the lower deck which hosts two guest cabins with separate horizontal births and ensuite bathrooms whilst the master cabin is at full beam astern. It comprises a walk in wardrobe and an ensuite with separate shower room. On this same deck but up at the bows there are the crew's quarters comprising the captain's cabin, two bunks for the other crew members, a bathroom with shower and yet another single cabin to host, if need be, another guest of the yacht owner's. The main deck is conventionally distributed with the wheel house and its chart table at the bows, a large galley with an annexed saloon for the crew is followed by a dining area for 8, hence a sizeable saloon for 6 to 8 people with coffee tables and a last generation audiovisual system. The flying bridge has a second two seat steering controls area, a sunbathing and outdoor dining area with a table and sofa. The flying bridge extends astern into a platform area for the dinghy or ski-jet which are easily manoeuvred by a davit installed on the deck below.

For further information: Benetti Sail Division, 9 Avenue des Castelans, 98000 Monaco. Tel: +377. 92059207, Fax: +377.92059469. web page, email:

Technical data
Length: 23.90 metres
Beam: 6.20 metres
Draught: 2.10 metres
Fuel tank: 20.000 litres
Water tank: 3.800 litres
Displacement: 100.000 kilos
Engines: 2 x 379 HP MAN D2866 LXE 40
Cruising speed: 11.3 knots
Range at 10 knots 2.500 nm
Class Rina 100 A 1.1 "Y" Class.